Water is tasteless, colorless, and odorless liquid, but it’s one of the necessities of life. With the increasing global population, finding fresh water will become even more challenging!
Water being the essence of all life on Earth, must be conserved in order to restore the balance and also to resolve the minor issue of saving the planet.
1. Check faucets and pipes for leaks
A small drip from a worn faucet washer can waste 20 gallons of water per day. Larger leaks can waste hundreds of gallons. Getting into the habit of conservation is not difficult, and can have a big impact on the environment.
2. Don’t use the toilet as an ashtray or wastebasket
Every time you flush a cigarette butt, facial tissue or other small bit of trash, five to seven gallons of water is wasted.
3. Check your toilets for leaks
Put a little food coloring in your toilet tank. If, without flushing, the color begins to appear in the bowl within 30 minutes, you have a leak that should be repaired immediately. Most replacement parts are inexpensive and easy to install.
4. Use your water meter to check for hidden water leaks
Read the house water meter before and after a two-hour period when no water is being used. If the meter does not read exactly the same, there is a leak.
5. Install water-saving shower heads and low-flow faucet aerators
Inexpensive water-saving low-flow shower heads or restrictors are easy for the homeowner to install. Also, long hot showers can use five to ten gallons every unneeded minute. Limit your showers to the time it takes to soap up, wash down and rinse off. “Low-flow” means it uses less than 2.5 gallons per minute.
6. Put plastic bottles or float booster in your toilet tank
To cut down on water waste, put an inch or two of sand or pebbles inside each of two plastic bottles to weigh them down. Fill the bottles with water, screw the lids on, and put them in your toilet tank, safely away from the operating mechanisms. Or, buy an inexpensive tank bank or float booster. This may save ten or more gallons of water per day.
7. Insulate your water pipes.
It’s easy and inexpensive to insulate your water pipes with pre-slit foam pipe insulation. You’ll get hot water faster plus avoid wasting water while it heats up.
8. Take shorter showers.
One way to cut down on water use is to turn off the shower after soaping up, then turn it back on to rinse. A four-minute shower uses approximately 20 to 40 gallons of water.
9. Turn off the water after you wet your toothbrush
There is no need to keep the water running while brushing your teeth. Just wet your brush and fill a glass for mouth rinsing.
10. Rinse your razor in the sink
Fill the sink with a few inches of warm water. This will rinse your razor just as well as running water, with far less waste of water.
Hope you will benefit from these tips and make the planet a bit more greener. Join us in our battle against environmental degradation, or at least help us spread awareness. Maybe we can find a solution together. To learn more about Environmental Professionals Network and to get a hold of us, click here to book a meeting, or call us at 303-495-3705 or email us at firstname.lastname@example.org .
We’d love your feedback and comments, so please feel free to add your comments below or visit our Facebook page, we’d really appreciate it. It would also be cool if you’d like our page.
Related Articles and Resources:
- Finding Pure Water After A Disaster – Water Purification Methods
- 10 Green Habits To Adopt For A Greener Environment
- The Fundamental Essence of Life: An Incredible Truth
- Easy, Inexpensive, Water-Saving Solutions For Your Home
- Can Footprinting Stomp out Water Waste?
- 10 Ways to Get Ready For Winter – Winter Proof Yourself